Drager Alcotest 6000 Alcohol Breathalyser (A6000)

Drager Alcotest 6000 Alcohol Breathalyser (A6000)The Drager Alcotest 6000 is an alcohol breathalyser, using by professionals around the world. It’s a highly accurate and precise way of measuring breath alcohol content.
The Alcotest 6000 breathalyser is ready to use, so you can test yourself at any time and produce a result in seconds.  Simply switch on, wait for the screen to show READY and blow until you hear n audible click.  The Electrochemical DragerSensor will produce a precise result and show your result onscreen after only 3 seconds.  The display of this result will depend on the type of test taken (active or passive) and coloured LEDs will support the display and for warning messages.
It’s a simple and easy to use device with a clear display to guide you through each step required.  The design of the Alcotest and the mouthpiece ensures that hygiene levels are maintained throughout the testing process. 
The Slide ‘n’ Click mouthpieces provide a high level of hygiene and are individually packaged until they are required for use.  The mouthpiece intuitively clicks into the top of the Alcotest and this is even possible in poorly lit environments.  The mouthpieces are designed so there should not be any attempts at obstruction, these will be rejected by the A600.  There is also a spacer on the mouthpiece which keeps the lips of the test subject away from the unit and they should not come in to contact with it.  Replaceable mouthpieces are available from Frontline Safety.

Key Features

Comes with a reflective hand-strap
Up to 1500 breath tests can be done on one battery (temperature dependent)
Modern design with impact-resistant ABS/PC housing
Back-lit button and display
Audible confirmation of successful breath sample and warnings
Simple to navigate menu
Regular calibration required – see the manual for more info
Datalogger holds the last 500 tests with test number, date and time
Integrated clock shows warning or deactivation after end of service interval
IP rating of IP54
Optional Bluetooth for communication with the Drager Mobile Printer BT

Dimensions (W x H x D) & Weight

Approx. 50/60 x 141 x 31 mm / approx. 150 g, incl. battery
Display: 32 x 22 mm / 1.3″ x 0.9″ (128 x 64 pixels)

Measuring

Principle: EC sensor for 1/4″ technology, alcohol specific
Range: 0 to 2.5 mg/l; if measurement range limit is exceeded, a message is displayed

Operating Temperature

-5 to +50 °C / 23 to 122 °F

Relative Humidity

10 to 100 % relative humidity (non-condensing and in operating state

Ambient Pressure

600 to 1,300 hPa / 17.7 to 38.4 inch Hg

Power Supply

Replaceable CR123A-Battery (1.pcs), charge level indicator in display

Calibration

Wet gas or dry gas calibration

Vibration and Shock

EN 60068-2-27, EN 60068-2-6; EN 60068-2-64

CE Marking

CE conform

Norms

EN 15964, NHTSA, FDA Conformity, depending on configuration