MSA ALTAIR Oxygen (O2) 19.5/23 Vol % Gas Detector (Adjustable)
The Altair O2 gas detector from MSA is an economical, high performing monitor with the ability to detect oxygen depletion levels in industrial applications.
The oxygen version of the Altair accommodates a fast responding 20 series sensor.
The rugged suspension clip on the instrument will give you the confidence that it can be worn almost anywhere.
Testing the Altair O2 monitor is important and a simple bump check can be carried out with a single button press. Bump test results are shown on the screen for 24 hours and can be used as a checkmark.
Other testing equipment available for the Altair is the QuickCheck and the Galaxy which is a standalone calibration test system.
Minimum of two years operational service life
Large, easy-to-read numeric display shows unit lifetime, alarm, conditions, set points, peak reading and hours in alarm since activation
Housing is thick and rubberised with a tight seal offering protection from accidental drops – tested to withstand a 3m drop test.
A high structural stability is offered through metal screw inserts on Altair
Automatic recording of the latest 25 alarm events
Range (ppm)
0 to 25% Vol
Size
81 x 51 x 23 mm
Weight
85g
Operating Range
-20 – +50 °C
Humidity
10-95% RH non-condensing
Instrument Life
>2 years at an average of 2 minutes of alarm per day
IP Rating
IP 67 – protection against water and dust ingress
Alarms
Approvals
Europe – ATEX II 2G EEx ia IIC T4 (-20°C to +50°C)
Warranty
2 years or 1080 minute alarm under normal conditions
What’s Included?
